| a | accept the proposed width for the band marked by the white lattice plane trace |
| b | blink band edges (3x) |
| c | center the selected (hkl) or [uvw] in all rotatable projections |
| d | decline the proposed width for the band marked with the white trace |
| l | load Kikuchi pattern |
| m | display reciprocal lattice points measuered via 1st derivative |
| n | display or load the simulated digital twin (DynamicS) signal stored as *.bin or *.png |
| r | remove the selected (and perhaps further derived) bandwidth / reciprocal lattice point |
| Ctrl+s | save all graphics and data in the directory “Results/pattern name” (under construction) |
| t | remove all lattice plane traces starting from the selected one |
| Ctrl+z | Undo PC change (only the last 20) |
| F1 | Help screen |
| F2 | — Define initial traces (under construction) — |
| F3 | Optimize trace positions |
| F4 | Derive traces from initially defined (under development) |
| F5 | Derive “all” bandwidths from a single reference |
| F6 | Delete all bandwidths |